Menu
Akai Timbre Wolf Repair
An Akai Timbre Wolf is in for repair as one of the voices has a noticeably lower output from the other three.
The unit had a considerable amount of debris inside. Shards of polystyrene were floating around along with the remnants of what looked like a spider colony.
The PCBs were also covered with solder balls from the manufacturing process and a fair bit of muck which was cleaned off.
There are a lot of solder joints which don’t look too healthy and the slightly differing voice issue is going to take some probing which means somehow taking the whole lot apart whilst still being able to power her up. A bit of a pain as the boards are double sided.
