Magnetic Acoustic Seal 6001

Description

Magnetic Acoustic Seal – 6001

Magnetic acoustic seal 6001.

• Applications: Head and jambs of single swing steel clad doors and timber doors with IS6011 insert
• Can be supplied with magnetic keeper strip – 6011 if being used on a timber door.
• Excellent sealing even with no latch
• Can be used as a stop
• Sound reduction index 33dB when used with an appropriate threshold seal and door assembly
• Long lasting and hard wearing
• Effective operating distance: up to 2mm

Available in 1m and 2100mm lengths.

Fitting instructions for 6001 magnetic acoustic seal

A refrigeration type vinyl magnetic strip in an anodised aluminium housing, which provides a very tight seal for steel clad doors and jambs. It can also be used with timber doors if a rebate is made on the door face to accept the optional self-adhesive 6011 magnetic keeper strip. The magnetic strip has sufficient closing strength that latches may not be required. It can also be used in pairs on meeting stiles of timber doors as well as sliding doors.

Note: As a meeting stile seal, 6001 is not recommended for highly active doors. It is best suited for infrequent use or door closer hold open applications.

Location: Broad butt hinged doors for head, jambs or stiles. Can be used at meeting stiles for sliding doors.

Min/Max Gap: 4mm to 8mm (meeting stiles).

Standard Finish: Aluminium.

Seal Material: Flexible PVC charcoal.

Fixing Method: Zinc plated, cross recess head ST screws of the appropriate size are supplied.

Installation

(1) Measure door frame height/width and machine cut to suit.
NB. Machine cut mitred joints are recommended wherever possible. Before mitre cutting corner joints, ensure that seals will fix to jambs or door as specified.

(2) Although welded vinyl corner joints are ideal, lugs can be centre-punched to prevent vinyl magnetic seal from moving within the aluminium section.

(3) Lightly screw fix lengths to jamb/door using screws supplied (fixing holes are pre-drilled and slotted to allow seals to be accurately fitted and adjusted as required).

(4) Close door and adjust seal to ensure uniform seal around door, tighten fixing screws as required

Please note: the 6011 is no longer manufacturer with self adhesive strip it is plain so it can be stuck in place on the door leaf but be careful to make sure it is in the correct direction so that the magnets attract and do not repel each other.